Airsoft Guns Are Powered By Different Sources
There are three means of power used for airsoft guns; spring, electric, and gas. These three types of power also give rise to various guns that harness it, such as; shot guns, machine guns, rifles, and pistols. Replicates of real firearms, these airsoft machines are designed to only use 6-8mm wide projectiles.
When players of Airsoft are looking for a specific gun, they will take into consideration the length of the battery life, the capacity of the magazine, and the rate at which the gun fires. Other considerations may include; range, reliability, size, weight, customization, or how real it looks.
Spring Force airsoft guns – The very first airsoft firearms were known as “springers”, due to the spring power with which they used to fire projectiles. They were only a single action gun and able to fire one pellet at a time. Each shot had to be preceded with the cocking action, in order to prepare it for the next firing.
Electric Powered Airsoft Guns- The most commonly used guns for airsoft today are generally called AEGs or Automatic Electric Guns. These have rechargeable batteries that control gearboxes used to propel the BBs out of the gun. Some of the early airsoft pistols manufactured have weak BB velocities, due to the lack of fitting a motor into the housing that is small enough to fit properly. These electric pistols tend to have a greater firing range than the gas pistols. There are four different capacities of magazines for AEGs; real, low, mid, or high. The real-capacity magazines are equivalent to the realistic steel counterpart, holding under 30 rounds. Low-capacity clips hold 30-80, mid-capacity contains 80-150, and high capacity magazines house 200-500 plus projectiles. Drum magazines are also available and will hold thousands of BBs at once.
Gas Powered -The type of airsoft firearms that followed after spring powered were actually gas-powered that had either an external or an internal gas chamber. The internal reservoirs were CFC gas and the external ones used highly pressurized carbon dioxide. This type of gun is actually increasing in popularity, due to them becoming more and more realistic looking.
Gas – When the gas version of the airsoft models were started, there was the choice of either an internal or an external gas chamber. CFC gas was used in the internal chambers, while carbon dioxide was used in the external reservoirs. Due to the increasing realistic look to these guns, the popularity of them has rocketed.
Green gas is much more environmentally friendly than the other two kinds. It is mixed with minute quantities of perfume and silicon lubricant, plus it causes a recoil action when the gun is fired. This kickback makes the gun seem more realistic. Adapters have been made so that gas powered airsoft firearms can be used with pure propane, making it cheaper to power.
The typical magazine holds enough gas to fire over 30 projectiles from its magazine. This feature, plus the way the gun can be loaded and unloaded, adds to the realism of this airsoft firearm. Magazines on these gas models usually hold around 10-20 rounds. High-capacity magazines, which hold over 50 rounds, are also available.
Today a combination of aluminum and plastic are used, for both internal and external parts, to make realistic looking and light airsoft firearms.
Author: Anthoy Carter is very knowlegdeable about airsoft guns. Go to JD Airsoft Guns to find the best place to get airsoft guns online.
